Bulk Orders By quote
Larger runs, institutional supply and custom timelines are priced by quote. Send the quantity and the timeline and we will come back with a number.
Ask about bulk
Research Accessories
Bac water is bacteriostatic water: sterile water with 0.9% benzyl alcohol added as a preservative. It has no salt and no buffer. We sell it in 3ML, 10ML and 30ML vials for lab research.
The compounds researchers order most, by verified order volume.
More ways to save
Larger runs, institutional supply and custom timelines are priced by quote. Send the quantity and the timeline and we will come back with a number.
Ask about bulkSelect a product option
Choose a size to check its batch and certificate. Published reports remain available below; check the lot before using a report.
Verified test results
Each batch is analyzed by an independent third-party laboratory before release. The lots below were tested by Chromate and ILS Laboratories. Below is the report for lot BAC02, summarized from the certificate the lab published.
Every lot we have published for this compound, grouped by the lab that tested it, newest first. Open any certificate below, exactly as the lab released it.
Side by side
Technical specifications
Peer-reviewed literature
Every reference below is a published, peer-reviewed record, linked to its PubMed entry. Provided for educational reference only - not product claims.
Important research notice
Not for human, veterinary, or food use. This product is sold exclusively for laboratory research purposes. It is not intended to diagnose, treat, cure, or prevent any disease, and has not been evaluated by the FDA.
All referenced publications and registries are sourced from peer-reviewed journals and official registries. They are provided for educational reference only and are not product claims.
By purchasing, you confirm you are a qualified researcher and will handle this product in accordance with all applicable laws and regulations.
Ready when you are
The lot on this page links to the signed certificate for that batch.
Research accessory
Bac water is bacteriostatic water: sterile water with 0.9% benzyl alcohol added as a preservative. It has no salt and no buffer. We sell it in 3ML, 10ML and 30ML vials for lab research.
Labs use it as a reconstitution solution. That is the liquid that dissolves a freeze-dried (lyophilized) peptide before an experiment. The benzyl alcohol holds back the growth of microbes that get in after the vial is opened. That is why it suits a vial that is entered more than once.
Sterile water has no preservative. Saline is 0.9% sodium chloride. These three liquids are not interchangeable. Our comparison with sterile water sets out the differences.
How benzyl alcohol acts depends on the compound. In one study, a freeze-dried protein formed more aggregates when it was reconstituted with 0.9% benzyl alcohol than with plain water (Roy et al., 2005). In NMR work on an acylated peptide, benzyl alcohol showed no detectable interaction (Li et al., 2022). Use the diluent that your compound's own product page calls for.
This solution is made in the USA. Each batch is tested by an independent lab before release. The certificate for each published lot is on this page, under the lab that tested it: Chromate or ILS Laboratories.
Every order ships with certificate access for its lot. To check a vial, match its lot to the report in the COA portal.
You can read about the outside labs we work with: ILS Laboratories and Chromate. For cited research, storage notes and common questions, read our research guide.
Retain the product label and lot number with the research record. Review the matching certificate of analysis for test coverage and reported results. Identity, analytical purity, measured content, sterility and endotoxin testing are distinct assessments; one does not establish the others.
Follow the supplied label and your laboratory’s validated handling and storage procedures. Record the vehicle, concentration and preparation date where relevant. Dry-material stability does not establish the shelf life of a prepared solution.
Match the compound or ingredient identity, format, labeled quantity and shipping lot. Similar names or different formulations should not be treated as equivalent.
Open the linked certificate for the assigned lot or use the COA portal. Check sample identity, methods, date and reported measurements. A report for another lot or formulation is not a substitute.
No. An FDA-hosted label describes Sterile Water for Injection, USP as sterile, nonpyrogenic, distilled water in a single-dose container with no antimicrobial or other substance added. Bacteriostatic water is sterile water with 0.9% benzyl alcohol, a preservative that suits vials entered more than once.
It suppresses it rather than sterilizing: the 0.9% benzyl alcohol holds back bacterial and other microbial growth after a vial is opened. Dilution weakens it; when a protein was diluted with benzyl alcohol-preserved saline, mixes at 0.54% passed USP preservative-effectiveness tests, while one of two batches at 0.45% failed.
Two: water and benzyl alcohol. Hospira's US drug label for its 0.9% bacteriostatic water lists only those two, with benzyl alcohol at 9 mg per mL added as a bacteriostatic preservative; there is no salt or buffer. This page's current lot certificate, BAC02, reports 0.91% benzyl alcohol against a 0.8% to 1.0% specification.
This page sells Disguised Alpha's Bacteriostatic Water 0.9% in 10ML and 30ML sizes. Each published lot's certificate is shown under the lab that tested it, Chromate or ILS Laboratories. It is sold exclusively for laboratory research purposes, not for human, veterinary, or food use, and ships from the US West Coast, by FedEx 2-Day shipping.
Yes: a reconstitution solution is the liquid used to dissolve a lyophilized (freeze-dried) powder before laboratory work. Bacteriostatic water, sterile water with benzyl alcohol added as a preservative, is a common one; sterile water and dilute acetic acid are others. This page sells bac water with 0.9% benzyl alcohol in 10ML and 30ML vials.
Date the vial when it is first opened. USP General Chapter 797 limits a container meant for repeated entry to 28 days after first entry unless the manufacturer states otherwise, and this page sets no discard interval of its own. This page asks for 2 to 8°C, protected from light, once the seal is broken.
Yes. Under USP General Chapter 797, a container meant for repeated entry is not to be used more than 28 days after first entry unless the manufacturer states otherwise, and each entry through the stopper is a chance for contamination. Benzyl alcohol, the preservative, can also oxidize to benzaldehyde in air, as a study of commercial benzyl alcohol describes (Abend et al., 2004). Hospira's US drug label for its bacteriostatic water says not to use it unless the solution is clear and the seal intact, so discard a vial that looks cloudy, holds visible particles or has a damaged seal.
Not before opening: this page lists unopened vials at 15 to 25°C, protected from light and never frozen. After the seal is broken, it asks for 2 to 8°C with the vial closed and out of the light. Cold slows benzyl alcohol's action against bacteria (Lehmann, 1977), so refrigeration does not replace aseptic technique.
Pick the size one workflow will use up within the open-vial window. Every entry is a contamination chance, and USP General Chapter 797 limits a container meant for repeated entry to 28 days after first entry unless the manufacturer states otherwise, so a 10ML vial suits small or occasional work and a 30ML vial suits labs that reconstitute often. This page sells both sizes.
The current certificate is matched to the selected product option and assigned shipping batch.
Enable JavaScript to view the certificate for your selected option.
We share visit and purchase data with advertising partners to measure and show ads. Some US state laws, including California's, call that a sale or sharing of personal information. You can turn it off for this browser.
Ad sharing is on in this browser.
Saved in this browser only. For your account or other devices, email support@disguisedalpha.com. Privacy Policy